Skip to main content

Refeyn

Medical Equipment Manufacturing

Discover how Refeyn's mass photometry technologies can rapidly characterize single particles - like proteins and viral vectors - in solution and without labels.

Is Refeyn hiring?

Yes. As of November 4, 2026, Refeyn has 5 open roles on Metaintro. 3 were posted in the last 30 days.

Open roles

Newest first. Pay shown when the posting lists it.

Hiring pattern

How fast Refeyn is adding roles, and how they're set up.

New roles each monthRoles first posted in the month

4
5
5
1
2
JulyAugustSeptemberOctoberNovember
November: 2 new roles.

How roles are set upShare of open roles

31%
8%
46%
15%
HybridRemoteOn-siteNot stated
39% of roles are hybrid or remote.

Customers

All 18 companies Refeyn names as customers.

Customers hiring now3

Case studies1

  • The Ohio State University Center for Retrovirus Research

Other customers14

  • BIMOVIS GmbH​
  • University of Zurich
  • KBI Biopharma
  • University of Copenhagen Biotech Research & Innovation Centre
  • Aston University
  • University of Leipzig
  • Utrecht University
  • University of Oxford
  • AstraZeneca R&D
  • Rentschler Biopharma SE
  • University of Basel
  • University of Groningen
  • ABL Europe
  • Max Planck Institute

What their customers say

Quotes from people at Refeyn's customers.

“No other company I’ve interacted with is as available and helpful as Refeyn. They are happy to answer any general question or stop by, and can get online almost immediately. Refeyn’s connection with its customers is a huge selling point.”

Ross Larue · Research Professor · The Ohio State University Center for Retrovirus Research

“Our TwoMP is involved in all stages of sample preparation, from initial sample quality assessment to final analysis. It both speeds up our laboratory workflows and improves quality control... We use the TwoMP in every case where analytical SEC would be used normally. We do still utilize this method for sample preparation, but when it comes to analytics, mass photometry is better in both speed and precision.”

Mathias Gschell · BIMOVIS GmbH​

“I love running our new TwoMP Auto mass photometer. Finally, we have a fast and automated way to weigh the molecules we design and isolate in solution, with minimal sample requirements . It takes a minute to set up the slide, the software auto aligns, and I just need to leave a plate with my samples there for the pipetting robot to do its job. An hour and a half later I come back and look through my data, it’s amazing.”

Martin Pacesa · University of Zurich

“I’ve used AUC, A260/A280 and other techniques to measure adenovirus empty/full capsid ratios. The Karitro lets me do it quickly in the lab, with the accuracy of AUC. What I like most about the Karitro is the speed and ease of us – the software is so simple and straightforward !”

Julia Talarek · University of Oxford

“We use mass photometry in our lab to provide clients with fast, easily generated, and readily interpretable data to support drug development. Mass photometry is particularly useful in early-phase and formulation screening, and as an orthogonal technique to sedimentation velocity AUC for size distribution characterization.”

Nikki Combs · KBI Biopharma
Show 16 more quotes

“Unlike nsEM and cryo-EM, mass photometry allows us to look at our samples at the low nanomolar concentrations we use for activity assays... The MassFluidix HC was able to detect much longer filaments than expected – it turns out they tend to dissociate rapidly upon binding to the surface. We didn’t know our protein could do that!”

Lauren Salay · University of Washington

“Compared to SEC-MALS, mass photometry is fast and provides robust and reliable data… We also chose the MassFluidix HC as an add-on to the TwoMP, as some of our biophysical analyses do need to be conducted at higher concentrations.”

Michael Ploug · University of Copenhagen Biotech Research & Innovation Centre

“I recently ran some manual, time-resolved samples on the Refeyn TwoMP, and the data was an absolute eye-opener. It generated clear, decisive insights that gave us a level of system understanding we simply couldn't have uncovered from SPR alone.”

Peter Brown · Bicycle Therapeutics

“The underlying physics behind how it works are very complicated, but using the instrument is very much plug-and-play . We’ve got students in the lab using the instruments with no problems… One of the routine things that we are doing now is after solubilizing the protein and purifying it we put it into the mass photometer to check if there is a single peak of the right size before we then go on to do the expensive cryo-EM experiments.”

Philip Kitchen · Aston University

“The nice thing about mass photometry is that it happens in solution, without requiring labels or sample fixation . Therefore, I am sure of what to expect when I use magnetic tweezers, since I know how long my complex can remain stable at the desired temperature and conditions.”

Selgar Henkel-Heinecke · University of Leipzig

“Mass photometry was the method of choice for our study, since it can quickly quantify the relative abundance of all the tau oligomers and show how these populations change over time , from the beginning of the aggregation process.”

Simanta Sarani Paul · University of Alberta

“Mass photometry is very straightforward and convenient . You just need to dilute your sample in the right concentration and then you can quickly measure your sample in solution. You can also quickly analyze your measurements.”

Eduard Ebberink · Utrecht University

“Our experience with the KaritroMP has been great - very easy, rapid quantification of empty/full particles in purified adenovirus samples with accuracy comparable to that of AUC .”

Shawkat Hussain · University of Oxford

“[Our mass photometer] has been invaluable in a number of studies , ranging from simple cases of clarifying the oligomeric states of drug targets to elucidating complex binding mechanisms of small molecules.”

Anders Gunnarsson · AstraZeneca R&D

“The GMP software is simple, easy-to-use and all aspects of the workflow are captured in an audit trail. The automated analysis algorithm eliminates user bias and generates very repeatable data.”

Lewis Wharram · Rentschler Biopharma SE

“Mass photometry fits perfectly into our analytical workflows when we know there are additional species in our samples [such as antibody aggregates] but don't know their mass or oligomeric state. Now we finally have a suitable technology to fill that gap .”

Martin E.

“From the first moment I saw a mass photometer, I was mind-blown by how simple the instrument was to use and by how quickly you could see individual molecules and complexes... Since mass photometry requires very little sample, it is suitable for proteins that are hard to produce in large quantities... We also use mass photometry to quickly check our samples before using optical tweezers, to make sure we are really measuring single molecules.”

Kasia Tych · University of Groningen

“Using mass photometry and the MassFluidix HC system gives us that control where we can track over time and see ‘now it’s this size’, ‘now it’s broken down to tetramers’, ‘now it’s dimers’. It’s more kinetic than we could be with any other technique.”

Ross Larue​ · The Ohio State University Center for Retrovirus Research

“It’s a game changer in AAV characterization, for us as well as our clients . In one project, for example, we saw that the partially filled AAV capsids were way more abundant than desired. Thanks to the SamuxMP, we could identify this rapidly and went back to the plasmid design... which led to drastically lower production of partials during plasmid expression, simplifying our downstream processing and purification workflows.”

Quentin Bazot · ABL Europe

“For any biochemical experiments that I will do in the future, I will always use mass photometry as a technique that either complements other techniques or replaces them entirely. I will try to keep mass photometry as integrated in my work as possible because it is a very honest technique that gives you a direct picture of your sample.”

Luca Schulz · Max Planck Institute

“I’ve used AUC, A260/A280 and other techniques to measure adenovirus empty/full capsid ratios. The Karitro lets me do it quickly in the lab, with the accuracy of AUC.”

Julia Talarek · University of Oxford

Skills they ask for

Most frequent across open postings.

Tech stack

CMS
WordPress
Analytics
Google Analytics 4
CDN
Amazon CloudFront
Libraries
jQuery
Font Awesome
Swiper
E-commerce
WooCommerce
Security
CookieYes

Company facts

Founded
2018
Industry
Medical Equipment Manufacturing
Sector (NAICS)
Manufacturing
Peer
GE Healthcare
Website
refeyn.com

Roles by location

Where Refeyn is hiring. Pick a city to see its roles.

Similar companies

Companies in the same industry as Refeyn that are hiring now.

Questions about Refeyn

Is Refeyn hiring?
Yes. As of November 4, 2026, Refeyn has 5 open roles on Metaintro. 3 were posted in the last 30 days. The most are in Manufacturing (2), Sales (2), and Science, Technology, Engineering, and Math (1).
Where is Refeyn hiring?
Refeyn is hiring in Oxford, San Francisco, and United States, with the most open roles in Oxford.
Does Refeyn offer remote or hybrid work?
31% of open roles are hybrid and 8% are remote.
Who are Refeyn's customers?
Refeyn names 18 customers, including University of Washington, University of Alberta, Bicycle Therapeutics, The Ohio State University Center for Retrovirus Research, and BIMOVIS GmbH​.
Return to navigation